Environmental Services

Related Categories

Seller Type

Manufacturer
Service Provider

Product Type

Enquiry
Checkout

IEC Number

An Importer - Exporter Code (IEC) is a key business identification number which is mandatory for export from India or Import to India. No export or import shall be made by any person without obtaining an IEC unless specifically exempted.

FIEO Member

Location

Can’t find what you are looking for? Tell us what you need

Requirement Category

Requirement Sub Category

Requirement Description

First name

Last name

Company Name

Designation

Mobile Number

By clicking submit you agree to our Terms of Use and Privacy Policy

4 Products

Sort | Filter

4 Products

Municiple Solid Waste Plant ( MSW Plants Manufacturer )

Price on Request

Min Order Qty 1

Accept Small Orders

Implementation of Integrated MSW Under Rule 2000 All living beings on the earth from human beings to animals to microbes are made up of 5 basic elements i. e earth , sun water, air and ether which is called "Panch Tatvas". Nine of the Gods has created any thing worth calling waste. It is man's ignorance and lack of concern, which leads to discard, throught and dump such materials. with the increased pressure on life and paucity of life and paucity of time coupled with rapid urbanization, the quantity of discarded materials referred to as wastes is increasing in geometrical proportions worldwide Management of such discarded wastes is now a challenging tasks in all the urban and semi urban areas specially the task of prompt collection- transportation and disposal. Serveral other items such as metals, paper products, wood plastic are getting lost in the garbage dumps therby putting fresh demand on non renewable energy sources. The hollstic approach calls for integration of technologies for processing treatment to recover various usable products such as compost, fuel pellets, plastic granules, metals to the maximum extent so as minimize burden on the land filling, And also to conserve the natural resources, 1) COMPOSTING Composting is most essential component of Solid Waste processing. The short-term biodegradable waste mainly pre-cocking and post eating residues of food waste, left over of fruits, vegetables and other eatables which has high moisture content and low calorific value is also a major cause of environmental problems starting from mal-odors of breeding of disease pathogens, files, etc. This component of MSW requires prompt sanitization and biostabilsation followed by recovery of compost for nutrient recycling in agriculture.
2) SANITISATION Due to hot weather condition and richness of biosolid in terms of mineral nutrition protein and carbohydrate energy, these wastes are quickly invaded by pathogenic microorganisms and become the source of foul smell and spreding of disesses.These wastes are also great source for multiplication of flies, which becomes the carries for pathogenic bacteria. Therefore under the tropical and sub - tropical conditions all the bisosolid waste must be given a sanitization treatment with natural herbal extracts and bio-enzymes and not to resort to use of chemical disinfectants, as these chemicals often interfere with natural bioconversion process besides leaving toxic residues. 3) PRE - SORTING The waste received from transfor station is first taken to pre - sorting shed which is covered place where the tippers unload the waste immediately into tipping plat form The unloaded waste is fed into a feeder hopper by the help of grapple equipment /I.C.B./ Tractor. The material reaches the prosorting 100 mm tromnal the under flow 100 mm is dropped in to a tractor trolley where one or two labour pick manually the non- degradable / bulk inerts etc and send it to a separate place. The trolley takes the under flow to the concrete pad for degradation. The - 100 material also will be collected by a similar trolley and takes this to R. D. F. area.
At R. D. F. area it will be spread the thinly where the innerts etc. will be manually picked up by the Labors Like wise, it is proposed to have one set of pre- segregation trommel. Which operate simultaneously with the help of seven trolleys. The innerts like plastics, rubber metal glasses, and fabrics will be stored separately near R.D.F. area for R. D.F manufacture or direct sales.
4) Decomposition of Segregated Degradable Waste The waste received from the peregrination trommel (after manual segregation of recyclables / nondegradables) is shifted to compost pad.
5) The Windows of Formation The windrows of 4m x 2.5m is formed and the culture sprayed and allowed for degradation for seven days. 6) Windrows Platform 50 thick compacted clay/ concrete platform having permeability coefficient lessthan & 10 cm/ sec. & slope 1 to 2% 7) Turning of Windrows The windrows are turned / disturbed / loosened at the end of every seventh day. 8) Equipment Heavy duty front and pay loader/excavators are used for turning the windrows conveniently. 9) Moisture, Temperature, and Aeration The organic waste is degraded under the control the conditions of mosisture, temperature, Aeration, C. N. ratio and PH in order to have microbial aerobic windrow method of degradation of waste in to the much needed organic manure for the carbon deficient soils of India 10) Add on Material If CN ratio is less add straw sand dust papers taken CN 20:40 If CN ratio more adds sewage sludge slaughter waste etc. 11) Prevention of Pollution The MSW generally pollutes the environment by way of foul smell, leach ate generation, spread of diseases, contamination of soil, underground & surface water bodies. flies. birds. pigs. dogs menace etc. The pollution hazards likely to be caused will be controlled on the compost pad where aeration is provided under appropriate moisture level so that the degrading micro organism multiplies immensely and attacks the organic matter during which time the temperature increase in side.the garbage mass killing the harmful pathogens. The temperature increase thus sanities the waste mass and subsequently encourages breaking down process leading to stabilization of organic matter called humus. The temperature also kills weed seeds, insects eggs. Like the turning of windrows three to four times over a period of thirty days will continue under controlled conditions. Adequate oxygen throughout the mass normally ensure by turning. 12) Organic Manure The sanitized and stabilized organic matter when attains the status of humus it will be fine powder, black in color and gives earthy aroma. The manure will not have heavy metals and a hazardous material have NKP micro organism. micro nutrients which will not be present in the inorganic fertilizer.
13) Leacheat Generation Run Off The leach ate generated during the course of degradation will be led through the leach ate drains in to a leach ate tank. This will be precisely recycled since it acts as conserving moisture. nutrient, micro organisms. 14) Laminated Plastic Sheets The Plastic sheets used to protect the waste becoming wet during rainy season since activity will be going on in an open area.
15) Monsoon Shed 30 days degraded organic matter will be shifted to the covered area so that the processing could continue with out hindrance even during the monsoon days.
16) Processing of the degraded organic matter The Compost plant consists of one set of rotary screen of 35 mm 14mm and 6mm
17) 35mm Screen The under pass of 35mm is passed directly to the next screen
18) 14mm Screen The under pass of 35mm is screened in 14 mm screen
19) Rejects The rejects of 35 and 14mm which may contain non degradable and plastic bits will be made use of for RDF to the extent of its suitability and the balance goes to land fill as cover material.
20) 6mm Final Screen The under flow of 14 will lead the manure to 6 mm final screen. This screen will have a magnetic separator before gets screened. This will arrest iron filings etc. 21) Maturity/ Curing Shed The finished material is allowed for curing under the shed for minimum 10-15 days. 22) No Crushing & Grinding Finishing The machinery proposed not have crushing & grinding facility therefore the chances of manure containing glass pieces are less. 23) De - stoning Facility The final product is passed through a gravity separator to eliminate the sand silica etc. 24) 6 mm Reject This will be used as a pit fill manure to sold at a very cheap price or could be utilized as a cover material for land fill. 25) Mixing After screening form 4 mm screen you can pass the compost from liquid aid mixer to maintain the moisture 26) Packing After liquid aid mixer your material is ready for packing 27) Fuel pellets/ Rdf : Most important component of MSW Most important component of MSW Processing. The homogeneous material will be received in the form of bales at one end of the screw conveyor and as fluffs on the other end of screw conveyor. The bales and fluffs will be utilized based on the need for various purposes.The rejects +100 mm, +35 mm received from pre - segregation trommel is usedfor preparing RDF after manual pickup of the innerts. The plastics, rubber, metal, glass, fabrics etc. are shifted to specific place for storage. 28) Innerts Processing All waste processing facilities as well as technologies have great problem with sand, slit, earth ash in the premises three is increasing disposal ofconstruction materials, sand, processing technologies. This component of waste can be separated through mechanical means as well as by management control by separate lifting and storage for re-use . " Debris " can be processed properly and converted into civil bricks hollow blocks or clean sand stone - metal. These environment friendly construction materials are excellent answer forhanding of major MSW Contaminants The innerts obtained during above processing will be processed making bricks, sand and jelly depending on the type of insert available OR stones & debris are crushed to convert into usual concrete for civil construction. 29) Plastic Recycling In larger cities, with the concept of shopping malls and plazas as well as due to change in the living style the convent of plastic in MSW is increasing @ 5 to 7% per year. Currently in most of the larger size cities. The content of plastic is 4 to 6%. In neighbouing countries. the content of plastic item is 4 to 6%. It has been observed that even 1% plastic [by weight] disposal in the sanitary landfill occupies 8 times more space [ volume wise]. Thereby increase the landfill area requirement as well as operating cost. In view of thi, it is essential to consider recyling of plastic as an integrated part of MSW Processing facilities 30) Landfill Non degradable mixed with undigested MSW put into underground with safe scientfic way i.e. a geopolyclothe spread out over a thick cushion sand. then above it land fill material is covered in it with suitable gas ven arrangement

MAYO VESSELS AND MACHINES PRIVATE LIMITED

Aurangabad, India

Business Operations: Manufacturer

Carbon & Plastic Credits Advisory Services

ITC-HSN: 392690

Price on Request

Min Order Qty 1

Accept Small Orders

We assist Companies, Organisations and Individuals to adopt, adapt and change the way they work, manufacture, deliver or perform with the aim to prevent trending Climate Change, protect our Environment from its adverse impact, and work towards UNO-laid Sustainable Development Goals.
Services | We offer 29 services in the following fields: Carbon & Plastic Credits (Buying, Selling & Advisory), Circular Economy, Nature Based Solutions, Renewable Energy, ESG Reporting, Environment Audit, Social Audit, Green Project Investment Consulting, Carbon & Plastic Advisory services including preparation of PDD (Project Design Document), its Monitoring & Validation/ Verification by IEE (Independent Evaluation Experts), Projects in Climate, Community & Biodiversity, Sustainable Development Goals (SDG) and Airport Carbon Accreditation.
Programs/ Methodologies | We provide services adhering to following Standards, Programs & Methodologies: 1. CDM methodology (Clean Development Mechanism) of UNFCCC (United Nations Framework Convention on Climate Change). 2. Verra Registry Programs (USA): a. Plastic Waste Reduction Standard. b. SD VISta (Sustainable Development Verified Impact Standard). c. CCB Standard (Climate, Community & Biodiversity). d. VCS (Verified Carbon Standard). 3. GS4GG (Gold Standard for Global Goals). 4. GCC (Global Carbon Council), Qatar. 5. GES (Global Emissions Standard), USA. 6. Social Carbon Standard. 7. CCBA (Climate, Community & Biodiversity Alliance).
https://www.climate-change.in/

Climate Change

Gurugram, India

Business Operations: Service Provider

Municipal Solid Waste Management Services

0.43

Min Order Qty 1

Product Details:
Type Of Services: Waste Processing Service Location: Residential Type Of Waste: Biodegradable Frequency: Monthly

CIGI SOLUTIONS

Mumbai, India

Buy Now

Solar Power Systems - Residential & Commercial

Price on Request

Min Order Qty 1

Solar Power Systems - Residential & Commercial by Ananya Trades is designed to meet your high-quality packaging and printing needs. With superior durability and a smooth finish, this board paper is ideal for a range of applications. Key Features: ? High-quality material ensuring strength & durability ? Smooth surface for premium printing results ? Ideal for packaging, printing, and industrial use ? Available in various thicknesses & finishes