ATV61HC31N4

Price on Request

Min Order Qty 1

  • Product not available

Variable speed drive ATV61 - 500 hp - 460 V

MAVEN AUTOMATION

Ahmedabad, India

Business Operations: Manufacturer, Merchant, Service Provider

Contact us for


By clicking on ‘Send Trade Enquiry’, you agree to our terms & condition and user policies

Main
range of product
Altivar 61
 
product or component type
Variable speed drive
 
product specific application
Pumping and ventilation machine
 
component name
ATV61
 
motor power kW
280 kW, 3 phases at 380...480 V
315 kW, 3 phases at 380...480 V
 
motor power hp
450 hp, 3 phases at 380...480 V
500 hp, 3 phases at 380...480 V
 
power supply voltage
380...480 V - 15...10 %
 
supply number of phases
3 phases
 
line current
494 A for 380 V 3 phases 280 kW / 450 hp
494 A for 480 V 3 phases 280 kW / 450 hp
544 A for 480 V 3 phases 315 kW / 500 hp
555 A for 380 V 3 phases 315 kW / 500 hp
 
EMC filter
Level 3 EMC filter
 
assembly style
With heat sink
 
apparent power
325.1 kVA at 380 V 3 phases 280 kW / 450 hp
365.3 kVA at 380 V 3 phases 315 kW / 500 hp
 
maximum prospective line Isc
50 kA for 3 phases
 
maximum transient current
739.2 A for 60 s, 3 phases
 
nominal switching frequency
2.5 kHz
 
switching frequency
2...8 kHz adjustable
2.5...8 kHz with derating factor
 
asynchronous motor control
Flux vector control without sensor, standard
Voltage/frequency ratio, 5 points
Voltage/frequency ratio - Energy Saving, quadratic U/f
Voltage/frequency ratio, 2 points
 
synchronous motor control profile
Vector control without sensor, standard
 
communication port protocol
Modbus
CANopen
 
type of polarization
No impedance for Modbus
 
option card
Communication card for APOGEE FLN
Communication card for BACnet
Communication card for CC-Link
Controller inside programmable card
Communication card for DeviceNet
Communication card for Ethernet/IP
Communication card for Fipio
I/O extension card
Communication card for Interbus-S
Communication card for LonWorks
Communication card for METASYS N2
Communication card for Modbus Plus
Communication card for Modbus TCP
Communication card for Modbus/Uni-Telway
Multi-pump card
Communication card for Profibus DP
Communication card for Profibus DP V1
 
Complementary
product destination
Synchronous motors
Asynchronous motors
 
power supply voltage limits
323…528 V
 
power supply frequency
50...60 Hz - 5...5 %
 
power supply frequency limits
47.5...63 Hz
 
continuous output current
616 A at 2.5 kHz, 380 V - 3 phases
616 A at 2.5 kHz, 460 V - 3 phases
 
output frequency
0.1…500 Hz
 
speed range
1…100 in open-loop mode, without speed feedback
 
speed accuracy
+/- 10 % of nominal slip 0.2 Tn to Tn without speed feedback
 
torque accuracy
+/- 15 % in open-loop mode, without speed feedback
 
transient overtorque
130 % of nominal motor torque +/- 10 % for 60 s
 
braking torque
<= 125 % with braking resistor
30 % without braking resistor
 
regulation loop
Frequency PI regulator
 
motor slip compensation
Not available in voltage/frequency ratio (2 or 5 points)
Adjustable
Can be suppressed
Automatic whatever the load
 
diagnostic
1 LED (red)drive voltage:
 
output voltage
<= power supply voltage
 
electrical isolation
Between power and control terminals
 
type of cable for mounting in an enclosure
With an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 Â°C, copper 70 °C / PVC
With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 Â°C, copper 75 °C / PVC
Without mounting kit: 1 wire(s)IEC cable at 45 Â°C, copper 70 °C / PVC
Without mounting kit: 1 wire(s)IEC cable at 45 Â°C, copper 90 °C / XLPE/EPR
 
electrical connection
Terminal 2.5 mm² / AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
Terminal 4 x 185 mm² / 3 x 350 kcmil (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3)
Terminal 4 x 185 mm² / 3 x 350 kcmil (PC/-, PO, PA/+)
 
tightening torque
0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
41 N.m, 360 lb.in (PC/-, PO, PA/+)
41 N.m, 360 lb.in (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3)
 
supply
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 %, <10 mA with overload and short-circuit protection
Internal supply: 24 V DC (21…27 V), <200 mA with overload and short-circuit protection
External supply: 24 V DC (19…30 V)
 
analogue input number
2
 
analogue input type
AI1-/Al1+ bipolar differential voltage: +/- 10 V DC 24 V max, resolution 11 bits + sign
AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits
AI2 software-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits
 
sampling time
2 ms +/- 0.5 ms (AI1-/Al1+) - analog input
2 ms +/- 0.5 ms (Al2) - analog input
2 ms +/- 0.5 ms (AO1) - analog output
2 ms +/- 0.5 ms (LI1...LI5) - discrete input
2 ms +/- 0.5 ms (LI6)if configured as logic input - discrete input
 
absolute accuracy precision
+/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C
+/- 0.6 % (AI2) for a temperature variation 60 °C
+/- 1 % (AO1) for a temperature variation 60 °C
 
linearity error
+/- 0.15 % of maximum value (AI1-/Al1+)
+/- 0.15 % of maximum value (AI2)
+/- 0.2 % (AO1)
 
analogue output number
1
 
analogue output type
AO1 software-configurable current, analogue output range 0...20 mA, impedance: 500 Ohm, resolution 10 bits
AO1 software-configurable voltage, analogue output range 0...10 V DC, impedance: 470 Ohm, resolution 10 bits
AO1 software-configurable logic output 10 V, 20 mA
 
discrete output number
2
 
discrete output type
Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
Configurable relay logic: (R2A, R2B) NO - 100000 cycles
 
maximum response time
<= 100 ms in STO (Safe Torque Off)
R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 ms
R2A, R2B <= 7 ms, tolerance +/- 0.5 ms
 
minimum switching current
3 mA at 24 V DC for configurable relay logic
 
maximum switching current
R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms
R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms
R1, R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms
R1, R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms
 
discrete input number
7
 
discrete input type
Programmable (LI1...LI5)24 V DC (<= 30 V), with level 1 PLC - 3500 Ohm
Switch-configurable (LI6)24 V DC (<= 30 V), with level 1 PLC - 3500 Ohm
Switch-configurable PTC probe (LI6)0…6 probes - 1500 Ohm
Safety input (PWR)24 V DC (<= 30 V) - 1500 Ohm
 
discrete input logic
Negative logic (sink) (LI1...LI5), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (LI1...LI5), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (LI6)if configured as logic input, > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (LI6)if configured as logic input, < 5 V (state 0), > 11 V (state 1)
 
acceleration and deceleration ramps
Automatic adaptation of ramp if braking capacity exceeded, by using resistor
S, U or customized
Linear adjustable separately from 0.01 to 9000 s
 
braking to standstill
By DC injection
 
protection type
Against exceeding limit speed: drive
Against input phase loss: drive
Break on the control circuit: drive
Input phase breaks: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Overcurrent between output phases and earth: drive
Overheating protection: drive
Overvoltages on the DC bus: drive
Power removal: drive
Short-circuit between motor phases: drive
Thermal protection: drive
Motor phase break: motor
Power removal: motor
Thermal protection: motor
 
insulation resistance
> 1 mOhm 500 V DC for 1 minute to earth
 
frequency resolution
Analog input: 0.024/50 Hz
Display unit: 0.1 Hz
 
connector type
1 RJ45 (on front face) for Modbus
1 RJ45 (on terminal) for Modbus
Male SUB-D 9 on RJ45 for CANopen
 
physical interface
2-wire RS 485 for Modbus
 
transmission frame
RTU for Modbus
 
transmission rate
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal
9600 bps, 19200 bps for Modbus on front face
20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
 
data format
8 bits, 1 stop, even parity for Modbus on front face
8 bits, odd even or no configurable parity for Modbus on terminal
 
number of addresses
1…127 for CANopen
1…247 for Modbus
 
method of access
Slave CANopen
 
marking
CE
 
operating position
Vertical +/- 10 degree
 
net weight
207 kg
 
width
595 mm
 
height
1190 mm
 
depth
377 mm
 
Environment
noise level
68 dB conforming to 86/188/EEC
 
dielectric strength
3535 V DC between earth and power terminals
5092 V DC between control and power terminals
 
electromagnetic compatibility
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
 
standards
EN/IEC 61800-5-1
EN/IEC 61800-3
EN 61800-3 environments 1 category C3
EN 61800-3 environments 2 category C3
EN 55011 class A group 2
UL Type 1
IEC 60721-3-3 class 3C2
 
product certifications
NOM 117
DNV
GOST
UL
C-Tick
CSA
 
pollution degree
3 conforming to EN/IEC 61800-5-1
3 conforming to UL 840
 
degree of proctection
IP41 on upper part conforming to EN/IEC 60529
IP41 on upper part conforming to EN/IEC 61800-5-1
IP54 on lower part conforming to EN/IEC 60529
IP54 on lower part conforming to EN/IEC 61800-5-1
IP00 conforming to EN/IEC 60529
IP00 conforming to EN/IEC 61800-5-1
IP30 on side parts conforming to EN/IEC 60529
IP30 on side parts conforming to EN/IEC 61800-5-1
IP30 on the front panel conforming to EN/IEC 60529
IP30 on the front panel conforming to EN/IEC 61800-5-1
 
vibration resistance
0.6 gn (f= 10…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…10 Hz) conforming to EN/IEC 60068-2-6
 
shock resistance
4 gn for 11 ms conforming to EN/IEC 60068-2-27
 
relative humidity
5…95 % without condensation conforming to IEC 60068-2-3
5…95 % without dripping water conforming to IEC 60068-2-3
 
ambient air temperature for operation
-10…45 Â°C (without derating)
45…60 Â°C (with derating factor)
 
ambient air temperature for storage
-25…70 Â°C
 
operating altitude
<= 1000 m without derating
1000...3000 m with current derating 1 % per 100 m
 
Packing Units
Package 1 Weight
198.000 kg
 
Package 1 Height
5.300 dm
 
Package 1 width
6.350 dm
 
Package 1 Length
12.900 dm
 
Offer Sustainability
Sustainable offer status
Green Premium product
 
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
 
Mercury free
Yes
 
RoHS exemption information  
China RoHS Regulation  
Environmental Disclosure  
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
 
Contractual warranty
Warranty
18 months
Established in: 2011
Bussiness Type: Partnership
Bussiness Type: Manufacturer, Merchant, Service Provider
MSME: Yes
Countries exporting to: Afghanistan, Australia, Bangladesh, Belgium, Bermuda, Bhutan, Brazil, British Indian Ocean Territory, Canada, Central African Republic, China, Denmark, Egypt, Ethiopia, External Territories of Australia XA, Finland, France, Georgia, Germany, Ghana, Greenland, Hong Kong S.A.R., Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Korea North, Korea South, Kuwait, Liechtenstein, Lithuania, Macau S.A.R., Malaysia, Maldives, Mali, Malta, Morocco, Myanmar, Namibia, Nepal, Netherlands Antilles, Netherlands The, New Caledonia, New Zealand, Oman, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Helena, Saudi Arabia, Senegal, Singapore, South Africa, Sri Lanka, Switzerland, Taiwan, Tajikistan, Tanzania, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States, United States Minor Outlying Islands, Uzbekistan, Vatican City State (Holy See), Vietnam, Yugoslavia, Zambia, Zimbabwe
Export Turnover (3 years): Less than US$100,000
Countries would like to export to: Australia, Austria, Bangladesh, Belgium, Central African Republic, China, Colombia, Egypt, Ethiopia, External Territories of Australia XA, France, Germany, Greece, Greenland, Hong Kong S.A.R., Hungary, India, Indonesia, Iran, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Korea North, Korea South, Kuwait, Mexico, Monaco, Nepal, New Zealand, Oman, Poland, Romania, Russia, San Marino, Saudi Arabia, Senegal, Singapore, Slovakia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Turkey, Uganda, United Arab Emirates, United Kingdom, United States, United States Minor Outlying Islands, Uzbekistan, Vatican City State (Holy See), Vietnam, Zambia
No of employees: 11-30

Related Products