My Account
-
Buyer
Register as a Foriegn Buyer
-
Seller
Log In Register as a Seller
My Account
Buyer
Seller
Min Order Qty 1 KGS (Kilograms)
Product not available
Double Component Type High Strength Polyurethane Water Stop Material
CY-505 is Double component type hydrophobic polyurethane resin that
cuts off water from cracks and reinforces the maintenance
works on concrete structures, subways and tunnels.
It is a low expansion water stop reinforcing agent of which
the water reaction expansion ratio is minimized.
Compared to conventional polyurethane water stop
materials, it is stronger and its hardened foam is
more rigid. It does not generates defects
by foam deformation and
it provides virtually permanent
water stop effect.
Contact us for
Injection Grouting Chemical
Double Component Type High Strength Polyurethane Water Stop Material
Features
- With its low viscosity property, it penetrates into leakage sections
in tiny cracks and provides perfect water stop performance.
- After hardened, it provides excellently higher compressive,
adhesive and tensile strengths that the mechanical
strength of conventional concrete structures.
- Since its pot life is sufficient(about 30~50 minutes)when the base
agent and the curing agent are mixed, injector, it can be injected
by the single component injector.(CY-800M1, CY-0800M2, CY-1000)
Uses
- Defective concrete.(Cracked or Honeycombed)
- Tunnels, Dams, Subway(Metro), Sewers, Manholes.
Packing Unit
- Base agent(20kg) and Curing agent(20kg)
Advantages
- Reinforcement of deteriorated concrete structure.
- Repair concrete cracks for water-stop.
- It is possible to use at dry and wet concrete cracks.
- Deep penetration into finest cracks.
- Inert after curing, no shrinkage.
- Does not create new cracks.
Important Notes
- Minimum ambient and substrate temperature is 5℃.
- Material shall be store in a dry cool place.
- Good storage stability for unopened containers at 15℃~30℃.
